Xerox 180 - Manual (Page 130)

JOB CONTROL TASKS
5-16 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
To print a sample of graphic images:
Step 1. Select “Sample Images” from the Job Control menu to open the
Sample Images window.
Figure 5-11. Sample Images window
Step 2. Either:
•
Enter the image file name of the graphic in the File ID field to
print a sample of a graphic stored on the system disk.
•
Leave the default value of *.IMG to print samples of all graphics
at 300 spi.
Step 3. You have the following print options:
• To print an enlarged or reduced version of the graphic
sample(s), enter the enlargement or reduction value in the
Scaling Factor field. For example, to print a graphic image
reduced by 25 percent, enter 1/4 in the field.
Note: An image may be enlarged by up to a factor of 8 or
reduced as small as 1/8.
• To specify where the graphic prints on the page, enter the
vertical and horizontal positions in the appropriate fields.
•
To have the samples(s) print in landscape orientation, select
the landscape option from the auxiliary menu next to the
Orientation field. Otherwise, the samples print in portrait
orientation.
•
To specify the units used for the vertical and horizontal
positioning of the image, select the unit from the auxiliary
menus next to the Vertical and Horizontal Units fields. The
default value of the field is inches.