Xerox 180 User Manual
Page 287
Advertising
PROBLEM SOLVING TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
12-7
Adjusting the decurler lever
To adjust the decurler lever:
Step 1.
Open the right door of the printer and locate the decurler lever (see
figure 12-6).
Figure 12-6. Decurler lever
Step 2.
If the print curl is +2 or more, move the green decurler lever to the
right.
Step 3.
If the print is -3 or more, move the green decurler lever to the left.
Step 4.
If the decurler adjustment does not eliminate the paper curl problem,
turn the paper stack over in the feeder tray.
Step 5.
If there is still a paper curl problem, perform steps 1 to 4 again.
Step 6.
If all else fails, insert paper from a new ream.
Advertising