Xerox 180 User Manual
Page 231
STATUS AND PRINT TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
9-33
You may also use this task to display the status of less than 100 print
jobs or up to 100 jobs with any of the following statuses:
•
Done. The job was completely printed.
•
Aborted. The job was aborted during processing or printing.
•
Reset. The job was aborted by the Reset task.
•
RCVY/NS. The job was aborted due to a system rollover, and
you did not ask to recover and print the job.
Note:
You can also access the Jobs Status window (PC UI) or
display (system controller terminal) by pressing the <JOBS
STATUS> key.
Jobs Status task through windows
Perform the following steps:
Step 1.
Select “Jobs Status” from the Print Tasks menu to open the Jobs
Status window (see figure 9-18).
Figure 9-18. Jobs Status window
Step 2.
To display the status of current jobs, select the Current header
button. (This is the default display.)
Step 3.
To display completed jobs, select either:
•
The All header button to display all jobs awaiting processing
and the status of up to 100 completed jobs. The Jobs All
window opens, allowing you to select the number of completed
jobs you want to display.
•
One of the other buttons to display only completed jobs with the
selection status. For example, to display up to 100 completed
jobs with the status Done, select the Done button.
Step 4.
The Jobs Status window now displays completed jobs that fit your
selection.
Note:
To update the jobs status display for your selection, click on
the appropriate header button. The current display is designated by
a check mark.