Xerox 180 User Manual
Page 82
PAPER FACTS
3-22
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Step 6.
If you are using a container or pallet, empty it and return it to the
stacker bin.
Note:
An empty container or a pallet must be in place if the bin
is set for container stacking.
Note the following facts reagarding the container:
•
The empty container must be the same size as the previous
container if the bin is in an auto switching combination or if the
print job is not complete and stacking will continue into the bin.
•
A different size container may be used if the bin is not selected
for use or is not in an auto switching combination.
•
To switch from containerless stacking to stacking into a
container or onto a pallet (for “pallet only” stacking), press and
release the green button on top of the stacker bin platform (see
figure 3-15).
Figure 3-15. Green button