Xerox 180 User Manual
Page 328
METER READING AND REPORTING
A-10
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Reviewing and changing data
To review and change data:
Step 1.
To begin the review, enter **1#. The system reads the first serial
number.
Step 2.
To accept the serial number and continue, enter #. The system then
reads back the A meter read.
Step 3.
Continue the review by accepting with the # sign each time the entry
is read back correctly.
If an entry read back is incorrect, enter **4# to cancel the entry, and
reenter the correct information after the voice prompts you to do so.
Be sure to wait until the voice is finished before making entries.
Step 4.
To end the review at any time, enter **2#. When the review is ended,
the system asks you to enter the # sign to acknowledge the entries
as complete. You may then choose to enter more machine
information or terminate the session. (Refer to step 6 in the previous
section.)