Xerox 180 - Manual (Page 218)

STATUS AND PRINT TASKS
9-20 XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
Transparencies task through windows Perform the following steps:
Step 1. Select the “Transparencies” option from the header auxiliary menu of
the Printer Status window to open the Transparencies window (see
figure 9-9).
Figure 9-9. Transparencies window
The default selection of the window is JDE/JDL. This means that
transparency use is controlled by the coding in the job stream.
To override the coding and cause the job to print on transparencies,
select the Yes button.
To override the coding and cancel printing on transparencies, select
the No button.
Step 2. Select either:
•
Apply/Close. Apply your selection and close the window.
•
Close. Close the window
Note: You must still ensure that either transparency or regular
stock is loaded in the appropriate feeder trays.
Transparencies task through
command line
To cause printing on transparencies, enter the following command:
TRANS YES
To cancel printing on transparencies, enter the following command:
TRANS NO
Note: You must still ensure that either transparency or regular
stock is loaded in the appropriate feeder trays.
Note: Changes made through the command line are not reflected
in the Transparencies window.