Xerox 180 - Manual (Page 53)

USING THE PC UI
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 2-17
Additional types of windows
In addition to Menu windows and Task windows, the following
windows appear on the desktop as a result of things you have done
or conditions in the LPS:
• Confirmation window
• Error window.
Confirmation window The confirmation window opens as a result of something you have
done in a Menu or Task window or as part of the logical sequence of
an operation. It has two targets: Yes and No. You must respond to
the confirmation window before you can continue using the PC UI
windows. The confirmation window has a yellow header bar if one of
the following applies:
• Data may be lost as a result of the proposed action.
• cycle down of the printer may occur as a result of the proposed
action.
Otherwise, a confirmation window has a green header bar. Figure 2-
10 shows a sample confirmation window.
Figure 2-10. Confirmation window
Error window The error window opens when the system encounters an error or a
condition that requires you to perform an action or choose from
several options. A sample error window is shown in figure 2-11.
Figure 2-11. Error window
There are also message windows that may appear as a result of
conditions in the LPS, communication problems between the PC UI
and the system controller, or problems within the PC UI. For
additional information on these windows, refer to the
180 LPS PC
User Interface Reference.