Xerox 180 - Manual (Page 71)

PAPER FACTS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE 3-11
Loading a feeder tray
To load one of the feeder trays.
Step 1. Select the tray you want to load by pressing the Tray Unlock button
on the paper tray. The Tray Unlock button is shown in figure 3-1.
You may also select the tray through the PC UI or the printer mimic
on the printer control console. Refer to the “Lower trays and bins”
section of the “Status and print tasks” chapter for instructions.
Note: If the printer has stopped due to a low paper condition,
you do not need to press the Tray Unlock button.
Figure 3-1. Tray Unlock button
Step 2. Wait until the Ready to Open indicator lights (see figure 3-2).
Figure 3-2. Ready to Open indicator