Xerox 180 User Manual
Page 89
SYSTEM CONTROL TASKS
XEROX DOCUPRINT 180 LPS OPERATOR GUIDE
4-5
Step 6.
When the LPS is offline, press the System Power Off button on the
operator control panel (see figure 4-4).
Figure 4-4.
System Power Off button on operator control panel
When the LPS is in offline mode
To power off the LPS if you are running offline:
Step 1.
Press the <JOBS STATUS> key or check the status display on the
PC UI desktop, to ensure the system is idle.
Step 2.
Unload the tape or cartridge. (Refer to “Offline printing tasks” chapter
for instructions on unloading tapes and cartridges.)
Caution:
If a tape or cartridge is loaded when the LPS is
powered off, data on the tape or cartridge may be destroyed.
Step 3.
Press the System Power Off button on the operator control panel.
(Refer to figure 4-4.)