Yamaha DME - Manual (Page 118)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 118
Event Scheduler
Event Schedule is shown when [GPI OUT] is set in “Event Scheduler.”
See “Event Scheduler” on
page 95 .
User Defined Button
User Defined Button is shown when [GPI OUT] is set in “User Defined Button.”
See “User Defined Button (User Defined Parameters)” on
page 126 .
Event Logger
Event Log is shown when [GPI OUT] is set in “Event Logger.”
See “Event Logger” on
page 72 .
[Apply] Button
Applies any current setting changes.
[OK] Button
Applies any setting changes and closes the window.
[Cancel] Button
Closes the window without changing any settings.
250msec
HI
LO
250msec
HI
LO
*1 Pulse waveform 1 *2 Pulse waveform 2