Yamaha DME - Manual (Page 126)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 126
User Defined Button (User Defined Parameters)
User Defined Parameters
Parameters that the user can operate using function keys <F1> through <F6> in the DME64N/24N unit
or ICP1 are called “User Defined Button.” Frequently changed parameters can be assigned in
advance to any of 24 (four pages times six) presets, and operated on the DME64N/24N unit or ICP1
even if DME Designer is not being used.
This function sets parameters in DME Designer that can be called by these function keys <F1>
through <F6>.
In DME Designer, user defined parameter settings are made using the “User Defined Button” dialog
box. The user defined parameter settings are shared between device group configurations.
“User Defined Button” Dialog Box
When you click [User Defined Button] in the [Tools] menu, the “User Defined Button” dialog box is
displayed.
■ Names and Functions
■ [Group]
Select the device group to be set up from the list.
■ [1]/[2]/[3]/[4] Tabs
Switches the set to which settings will apply. You can set up to six function keys in each set. The
user defined parameters set on a single tab are displayed on one page in the DME64N/24N unit or
ICP1 main screen.
Function Keys
The function keys are displayed in the leftmost column of the table. When you enter text for [LCD
Display], a short name with up to eight characters will be created and displayed to the right of the
function key.
NOTE
Does not apply to SP2060 units