Yamaha DME - Manual (Page 72)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 72
Event Logger
Click [Event Logger] in the [View] menu to open the “Event Logger” window. This window displays the
DME unit event log, and it allows specifying the log file to be stored on the computer as well as the log
file to be store in the DME unit.
If the window is opened while online the event log is automatically retrieved from the DME unit and
displayed as a list in the “Event Logger” window. New events are displayed in real time while the
window is opened and the system is online. If [Enable Logging] in the “Log Setup” dialog box is ON,
the event data will be written to the computer log file at the same time.
Names and Functions
NOTE
Does not apply to SP2060 units.
NOTE
Only users for whom the [View Log Window] checkbox in the “Security” dialog box has been turned ON can display the
“Event Logger” window. The default setting for this parameter is OFF.
NOTE
The events you wish to display in the Event Logger window must be set in advance in the “Event Log List” dialog box.
NOTE
Up to 1,536 events can be stored in the DME unit, while the maximum number of events that can be displayed in the “Event
Logger window is 12,288. When the DME unit even log becomes full, further events cannot be stored. When the DME event
log does become full, use the “Get Log” dialog box to retrieve the event log and then click the [DME Log Clear] button to
clear the DME unit log as necessary. If the “Event Logger” window event log becomes full, the oldest events are
automatically deleted to make room for new events.
Periodically make [Enable Logging] in the “Log Setup” dialog box active so that the event log is saved as a file on the
computer. This operation will automatically clear the DME unit event log.