Yamaha DME - Manual (Page 80)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 80
Names and Functions
■ DME Group/SP2060 Selection
Selects a DME group or SP2060.
■ List
Displays the contents of the scene.
Scene No.
Displays the scene number. Click here to select a scene.
Name
Displays the name of the scene. Click the [Name] box to enter a scene name. Up to 18 characters
can be entered.
If the scene has not been stored, “[No Data]” will be displayed. A name can be entered when a
scene is stored. The default names are “Scene001,” “Scene002,” etc. The three-digit number is the
same as the scene number (displayed in [Scene Number]) for the stored scene.
NOTE
The selected DME group or SP2060 is linked with the current device group.
NOTE
The SP2060 display can only display up to 16 single-byte characters. Some characters that appear correctly on the DME
Designer may change when displayed on the SP2060 display. For example, a backslash character will appear as a yen
symbol on the SP2060 display.
[Cut] Button
[Copy] Button
List [Scene Link] Button
[Store] Button
[Recall] Button
[Detail] Button
[Paste] Button
[Insert] Button
[Clear] Button [Recall Safe] Button