Yamaha DME - Manual (Page 85)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 85
■ Preset parameters List
Displays the preset parameters for each DME unit in the scene selected in the list. When another
scene is selected on the list, the contents of the preset parameters list will be changed.
You can change the preset parameters used in the scene by clicking the radio buttons to the left of
the preset parameters names. You can also create, delete, and store preset parameters or change
their names.
DME
Displays the DME. Below the DME there are [Slot], [Component], and [AD]. If there are preset
parameters below them, a [+] button will be displayed. When you click the [+] it becomes a [-] and
the presets are displayed.
Preset parameters
Displays DME preset parameters.
If you click the preset parameters name, selecting the text that is there, you can change the preset
parameters name. When preset parameters are automatically created when a scene is stored, they
are named “Preset001,” “Preset002,” and so on. preset parameters created with the [New] button
are named “New Preset.”
You can select the preset parameters used in a scene by clicking the radio buttons to the left of the
preset parameters names.
■ [Del] Button
Deletes the preset parameters selected on the preset parameters list.
■ [Store] Button
Stores the current parameter status in the preset parameters selected in the preset list. The
contents of the selected preset parameters will be overwritten.
■ [New] Button
Stores the current status and creates a new preset parameters. The newly created preset
parameters is named “New Preset1”, “New Preset2” etc.
■ [Del Unused] Button
Deletes unused preset parameters from DME units in the selected device group.
■ [Scene Link] Button
Opens “Scene Link Manager” dialog box.
Refer to “Scene Link Manager” on
page 145
NOTE
Presets used in a scene cannot be deleted.