Yamaha DME - Manual (Page 427)

Chapter 6 Component Guide
DME Designer Owner’s Manual 427
■ Matrix (Output Level)
In the matrix, you can view send levels from all output channels to output buses at once. The level
will be grayed out when the corresponding send is set to Off.
When you click an output channel number on the matrix, the [Matrix Mixer - All Inputs to One
Output] editor window opens. When you click the input channel number on the left side of the
matrix, the [Matrix Mixer - One Input to All Outputs] editor window opens.
The matrix is divided into groups, each with four input channels and four output channels. When
you place the mouse pointer over a group, its channel numbers are highlighted. Click to open the
[Matrix Mixer - Crosspoint] editor window.
4
Block On Turns ON send from all input channels to output buses.
The [ON] button lights up.
5 Off Turns OFF send from all input channels to output buses.
6 Nominal Resets all send levels, making them 0 dB.
7
Minimum Resets all send levels, making them -
∞ dB.
Section Name Function
Send level
Click to open the [Matrix Mixer - All
Inputs to One Output] editor window.
Click to open the [Matrix Mixer - One
Input to All Outputs] editor window.
Click to open the “In 1-4 x Out 5-8”
[Matrix Mixer - Crosspoint] editor window