Yamaha DME User Manual
Page 273
Chapter 4 Designer
DME Designer Owner’s Manual
273
Press the [F5] key to connect the uppermost open hot spot to the right of the selected object and
the uppermost open hot spot to the left of the object on the right, and continue automatically
making sequential connections until no more open ports are available on either object. Automatic
connections will not be made over other objects.
Press <Shift> + [F5] to connect the uppermost open hot spot to the left of the selected object and
the uppermost open hot spot to the right of the object on the left, and continue automatically
making sequential connections until no more open ports are available on either object. Automatic
connections will not be made over other objects.
Press the [F8] key to clear all wires connected to the selected object.
NOTE
When multiple objects are selected these operations apply to the first object selected.
NOTE
These shortcuts can be changed as required.
→ See Chapter 3 Main Panel Window, “Shortcut Keys” on
.