Yamaha DME - Manual (Page 458)

Chapter 6 Component Guide
DME Designer Owner’s Manual 458
HQ.Pitch
One input, two
output high-quality
pitch shifter. Pitch -12 to +12 semitones Pitch shift
Fine -50 to +50 cents Pitch shift fine
Delay 0.0 to 1000.0 ms Delay time
FB.Gain -99 to +99% Feedback gain (plus values for normal-phase
feedback, minus values for reverse-phase
feedback)
Mode 1 to 10 Pitch shift precision
Dual Pitch
Two input, two
output pitch shifter. Pitch 1 -24 to +24 semitones Channel #1 pitch shift
Fine 1 -50 to +50 cents Channel #1 pitch shift fine
Pitch 2 -24 to +24 semitones Channel #2 pitch shift
Fine 2 -50 to +50 cents Channel #2 pitch shift fine
Level 1 -100 to +100% Channel #1 level (plus values for normal phase,
minus values for reverse phase)
Pan 1 L63 to R63 Channel #1 pan
Level 2 -100 to +100% Channel #2 level (plus values for normal phase,
minus values for reverse phase)
Pan 2 L63 to R63 Channel #2 pan
Delay 1 0.0 to 1000.0 ms Channel #1 delay time
FB.Gain 1 -99 to +99% Channel #1 feedback gain (plus values for normal-
phase feedback, minus values for reverse-phase
feedback)
Delay 2 0.0 to 1000.0 ms Channel #2 delay time
FB.Gain 2 -99 to +99% Channel #2 feedback gain (plus values for normal-
phase feedback, minus values for reverse-phase
feedback)
Mode 1 to 10 Pitch shift precision
Rotary
One input, two
output rotary
speaker simulator. Rotate STOP, START Rotation stop, start
Speed SLOW, FAST Rotation speed (see SLOW and FAST parameters)
Slow 0.05 to 10.00 Hz SLOW rotation speed
Fast 0.05 to 10.00 Hz FAST rotation speed
Drive 0 to 100 Overdrive level
Accel 0 to 10 Acceleration at speed changes
Low 0 to 100 Low-frequency filter
High 0 to 100 High-frequency filter
Ring Mod.
Two input, two
output ring
modulator. Source OSC, SELF Modulation source: oscillator or input signal
Osc.Freq. 0.0 to 5000.0 Hz Oscillator frequency
FM Freq. 0.05 to 40.00 Hz Oscillator frequency modulation speed
FM Depth 0 to 100% Oscillator frequency modulation depth
Mod.Filter
Two input, two
output modulation
filter. Freq. 0.05 to 40.00 Hz Modulation speed
Depth 0 to 100% Modulation depth
Phase 0.00 to 354.38 degrees Left-channel modulation and right-channel
modulation phase difference
Type LPF, HPF, BPF Filter type: low pass, high pass, band pass
Offset 0 to 100 Filter frequency offset
Reso. 0 to 20 Filter resonance
Level 0 to 100 Output level
Distortion
One input, two
output distortion
effect. DST.Type DST1, DST2, OVD1, OVD2,
CRUNCH Distortion type (DST = distortion, OVD = overdrive)
Drive 0 to 100 Distortion drive
Master 0 to 100 Master volume
Tone -10 to +10 Tone
N.Gate 0 to 20 Noise reduction
Effect Type Parameter Setting Range Function