Yamaha DME - Manual (Page 219)

Chapter 4 Designer
DME Designer Owner’s Manual 219
■ External Device Properties
To display the “External Device Properties” dialog box, select any external device object besides
AD824 or AD8HR, then click the [Properties] command on the [Edit] menu.
[Label] Box
You can enter up to 100 English characters to display over the object.
[Width] Box
Specifies the object width in pixels.
[Height] Box
Specifies the object height in pixels.
[Style]
Sets the object style. Select [Plain], [Raised], or [Sunken] from the list.
[Label Font] Button
Sets the font for the label. Clicking here displays the “Select Font” dialog box.
For information about the “Select Font” dialog box, see
page 251 .
[Label Color] Button
This sets the color of the label text. Clicking here displays the “Select Color” dialog box.
[Port Label Color] Button
Sets the color of the I/O port label. Click to display the Select Color dialog box.
[Back Color] Button
Sets the object color. Click to display the Select Color dialog box.
NOTE
For information about the “Select Color” dialog box, see page 252 .