Yamaha DME - Manual (Page 208)

Chapter 4 Designer
DME Designer Owner’s Manual 208
I/O Card
Allows I/O card setup. [Slot1] ~ [Slot4] can be set up for a DME64N, while only [Slot] is available for
a DME24N. No I/O card setup is provided for the DME Satellite.
• [Select I/O Card]
Specifies the type of I/O card.
• [Card Label]
I/O card names having up to 100 characters can be entered here.
Port Style On Zone Window
Specifies how the DME ports appear in the zone window.
• [Custom Port Style]
Customizes the port display.
[Left]
Sets the number of ports to be displayed on the left.
[Right]
Sets the number of ports to be displayed to the right.
• [Audio Port (Classic Style)]
Displays all audio ports.
• [Edit Port Label and Type]
Sets the label and type for each port. Click to display the [Edit Port Label] dialog.
→ See "Edit port Label and Type" dialog box on
page 210 .
Compile Priority
Here you can make compile settings for the configuration.
• [Resource]
Compiles arrangable components in order based on their component numbers. The Delay
values differ depending on the signal lines.
• [Fixed Delay]
Fixes the Delay value (number of Samples) for the signal lines. However, it also reduces the
number of components that can be arranged.
[Auto Delay Compensation]
This turns ON or OFF a function that automatically corrects the component delay when
[Fixed Delay] is selected.
NOTE
Auto Delay Compensation will not function properly in configurations that have a loop connection.