Yamaha DME - Manual (Page 438)

Chapter 6 Component Guide
DME Designer Owner’s Manual 438
Surround
There are three types of surround pan components in the Surround subgroup: 3-1, 5.1, and 6.1.
The surround pan component editor has a two-dimensional surround pan graph where you can set the
location of the sound image.
You can set the sound location using the mouse in the two-dimensional surround pan graph.
The sound position cannot be changed via the numbers below the two-dimensional surround pan
graph. To specify position numerically use the Position X/Y knobs to the left of the graph.
Name
Location,
Setting Range
Function
1 2D Surround Pan Graph -- Sets the sound image orientation. You can
move the sound image by clicking and
dragging.
2 Speaker
Button L Left L63 F63 Clicking here moves the sound image to the
button location.
3
C Center C F63
4 R Right R63 F63
5 Ls Left Surround L63 R63
6
Bs Back Surround C R63
7 Rs Right Surround R63 R63
8 LFE Low Frequency
Effect (Sub Woofer) -- Indicates that there is a sub woofer. Clicking
makes the LFE level 0 dB. The sound image
does not move by clicking.
9
Left-Right Position L63 - C - R63 Displays and edits the LR sound image.
) Front-Back Position L63 - C - R63 Displays and edits the front-back sound
image.
2
1
8
3 4
5 6 7
9 )
9
)
Surround 6.1 component editor