Yamaha DME - Manual (Page 396)

Chapter 6 Component Guide
DME Designer Owner’s Manual 396
Double click the component to open the component editor. Mono channel and stereo channel
components have the same parameters.
Name Function
1 Limiter Curve Displays the limiter response in graph form. The
horizontal axis represents input signal level and the
vertical axis represents output level.
2 Gain Reduction Meter Displays the amount of gain reduction.
3
Output Meter Displays the output signal level.
Parameter Setting Range Function
4
Threshold -54 dB to ±0 dB Sets the threshold value.
5 Attack 0 to 120 ms Sets the attack time.
6 Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5 ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s Sets the release time. The range varies according
to the operating frequency.
9
KeyIn Mono SELF
KEYIN The trigger source can be selected from this menu.
The currently selected source is displayed in the
button.
Stereo L
R
LR BOTH
KEYIN
) On ON/OFF Turns the limiter ON.
1
Limiter component editor
4
5 6
23 7 8
Threshold = –20dB
RATIO=20:1
–70
–60
–50
–40
–30
–20
–10
0
+10
+20
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Input Level (dB)
Output Le
v
el (dB)