Yamaha DME - Manual (Page 296)

Chapter 4 Designer
DME Designer Owner’s Manual 296
4
Here you can set object properties.
[Inputs/Outputs Sets] is set to 1. Set the required number of ports.
5
Click the [OK] button.
A user module will be created, and placed in the Configuration Design window.
The user module properties can also be changed later. For information about the “User Module
Properties” dialog box, see “User Module” on
page 230 .
Saving User Modules
When user modules are saved using the [Save User Module] command, they are displayed
below [User Module] in the Toolkit window and can be used as templates.
• User modules placed in the configuration window can be saved with project files, but user
module templates are saved as files in a specific folder on the computer.
• User module templates can be exported and imported as user module template files. The export
file includes the component wiring/connection, library, and user module editor data.
• If a user module template is placed in the configuration window and then edited and saved with
a project file, the template will not be changed. Using the [Save User Module] command you can
either overwrite the original template or save the template with a new name.
• User modules created from templates use the same library as the original template. User module
templates that use the same library are categorized as a “user module group.” User module
templates are displayed in the appropriate group in each window.
• If a project is opened on a different computer, only user modules placed in the configuration
window will reappear. Export and import the data as a DME Designer All file in order to reproduce
the user module templates as well.
NOTE
Parameter links (local links) and component links are saved with user modules.