Notch filter (notch) – Yamaha DME User Manual
Page 406
Chapter 6 Component Guide
DME Designer Owner’s Manual
406
Notch Filter (Notch)
The notch filter attenuates the signal within a specified frequency band, while passing frequencies
outside that band. There are two types of notch filter components: mono channel and stereo channel.
Mono channel notch filters have one input and one output. Stereo channel notch filters have two of
each.
Double-click a component to display the component editor for it. The parameters are the same for
mono channel and stereo channel components.
Section
Parameter
Setting Range
Function
1
Input
Level
-
∞ to +10 dB
Sets the input signal level.
2
Phase
ON/OFF
Reverses the phase of the input signal.
3
Notch
Frequency
20 Hz to 20 kHz
Sets the center frequency.
4
Q:
0.1 to 63.0
Sets the band width of the frequency band
that will be changed
5
Bypass
ON/OFF
Turns bypass ON.
6
Output
Level
-
∞ to ±0 dB
Sets the output signal level.
2
1
5
3
4
6
Notch component editor