Yamaha DME - Manual (Page 165)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 165
■ Misc Tab
Displays and sets parameters not provided in the other tabs.
Scene Store
Displays and sets whether scene store operations can be performed on a DME64N/24N unit. The
settings are “Enable” and “Disable”.
Enable: Scene store possible.
Disable: Scene store not possible.
Last Mem. Resume
Determines whether the scene number that was selected when the power was last turned off will
be recalled when the power is turned on, or whether the overall status of the unit when the power
was last turned off will be recalled when the power is turned on. The settings are “ON” and “OFF”.
ON: The status of the unit when the power was last turned off will be recalled.
OFF: The scene number that was selected when the unit was last turned off will be recalled.
Event Scheduler
Displays and sets whether the DME unit's Event Scheduler function is active or not. The settings
are “ON” and “OFF”.
ON: The Event Scheduler is active.
OFF: The Event Scheduler is not active.
Internal HA Control
Specifies the port to be used for control of internal DME head amps from a PM5D or other
compatible console. The available ports depend on the device.
DME64N: OFF, Remote, Slot 1 through 4
DME24N: OFF, Remote, Slot 1
DME8i-C/DME8o-C/DME4io-C: OFF, Remote, CobraNet
DME8i-ES/DME8o-ES/DME4io-ES: OFF, Remote, EtherSound
NOTE
The default setting is “ON”, but will be set “OFF” when a file (.daf/.ddf) created by a version of DME Designer prior to
V1.2 is loaded.
NOTE
A device ID must be assigned to the DME unit to be controlled. Refer to “Internal HA Control” ( page 135 ) for details on
assigning device IDs.