Yamaha DME - Manual (Page 331)

Chapter 5 Components
DME Designer Owner’s Manual 331
■ “Slider Properties” Dialog Box
The “Slider Properties” dialog box will appear when you either double-click a slider or right-click it
and select [Properties] from the contextual menu. This lets you change the size, orientation, and
other characteristics of the related slider.
Size
[Width] and [Height] set the width and height of the slider in pixel increments.
[Direction]
Set the slider’s orientation to [Vertical] or [Horizontal] as required.
[Background Color]
Uncheck this item to make the background transparent. When this item is checked the [Color]
button to its right opens the “Select color” dialog box that can be used to select a background
color.
[Number of Lines]
Sets the number of scale markings (lines) between the minimum and maximum values.
Line Color
Click the [Select Color] button and select the desired scale line color in the “Select Color” dialog
box.
[Cap Size]
Select a knob cap size from the list: [Very Large]/[Large]/[Middle]/[Small]/[Very Small].
[Cap Color]
Select a knob cap color from the list: [Black]/[Gray]/[White]/[Red]/[Yellow]/[Green]/[Blue]/[Violet]
[Show Scale]
Check this item to show the numeric scale values.
Number Color
Click the [Select Color] button and select the desired scale number color in the “Select Color”
dialog box.
NOTE
The size of sliders can also be changed by dragging any of the slider’s corners in the user control editor.