Yamaha DME - Manual (Page 488)

Chapter 6 Component Guide
DME Designer Owner’s Manual 488
2. Rotate the dial to edit the value as
required.
3. Repeat step 1 to select the next value to
be edited, use the dial to edit as required, and
repeat until all values have been edited as
required.
4. When all values have been edited, press
the [ENTER] key. A confirmation window will
appear: press [ENTER] one more time to
confirm the edits and close the window.
List Parameters
List parameters allow you to make one selection from
a list of possibilities.
Rotate the dial to scroll up or down the list. In some
cases the centermost item on the display will be
always highlighted as the list is scrolled, and in others
the same item will remain highlight as the list is
scrolled up or down.
1. Use the dial to scroll up or down the list.
As you scroll the highlighted selection will
remain highlighted, and will scroll up or down
with the list.
2. Press the [ENTER] key to highlight the
centermost item on the display.
3. Press the [ENTER] key to select the
highlighted item and close the window.
NOTE
You can return to the Parameter Edit display without
changing any values by pressing the [CANCEL] key rather
than the [ENTER] key.
ENTER ENTER
ENTER ENTER
List Parameter with Scrolling Highlight
NOTE
In some cases a confirmation dialog will appear when the
[ENTER] key is pressed. If this occurs press the [ENTER] key
a second time to continue.