On/off parameters, Editing user defined button 1, Mute switching – Yamaha DME User Manual
Page 489
Chapter 6 Component Guide
DME Designer Owner’s Manual
489
ON/OFF Parameters
Parameters that are either ON or OFF are edited via
this type of display (e.g., Mute Parameter Edit display
in “Mute Switching” on
).
1.
Rotate the dial clockwise to select ON, or
counterclockwise to select OFF.
2.
Press enter to confirm the selection and
close the window.
Parameter Edit displays will also appear when the
[SCENE], [F6/MUTE] or other key is pressed.
These allow scene changes and other settings to be
edited as required.
Editing User Defined Button
1.
If the Main display is not showing, press
the [HOME] key to recall it.
2.
Press the [HOME] key until the page
containing the parameter to be edited
appears.
3.
Use the [F1]/[F2/[F3]/[F5] keys select the
parameter to be edited.
The Parameter Edit display for the selected User
Defined Button will appear.
4.
User Defined Button as required.
Refer to “Parameter Edit Displays” on
for
editing procedures.
Mute Switching
Turns the DME series output mute function ON or OFF.
1.
Press the [F6/MUTE] key for longer than 2
seconds.
The Mute Parameter Edit display will appear.
2.
Select Mute ON or OFF.
The mute function is turned on or off as described in
“ON/OFF Parameters” on
.
NOTE
User Defined Button can be of all three types: numeric, list,
and ON/OFF.
NOTE
Any changed User Defined Button values will be lost if the
power is turned off or if scenes are changed. To preserve the
changed values, store the scene data.
NOTE
All outputs in the device group, including the [PHONES] jack,
are muted.