Yamaha DME - Manual (Page 130)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 130
DAW Control
When you click [DAW Control] on the [Tools] menu, the “DAW Control” dialog box is displayed. Here
you can make settings for when the DME64N/24N is controlled from a DAW controller. This is set for
each zone configuration. The setting can be made only when in offline status.
Names and Functions
■ [DME]
From the list, select the DME64N/24N where you will be making settings.
■ [DAW Type]
Select the DAW type. The following choices are in the list: [Off], [Type1], and [Type2].
■ DAW Control Table
The following can be set for each channel from 1 to 64: [Function], [Controller], [Label], [Parameter].
NOTE
DAW Control can be set on DME64N/24N units only.
NOTE
DAW control editing can be performed only by users for whom the [Edit] security checkbox has been checked.