Crossover – Yamaha DME User Manual
Page 369
Chapter 6 Component Guide
DME Designer Owner’s Manual
369
Crossover
Separates input signals into multiple frequency channels and outputs them. The following five types of
components are available in the Crossover group: 2 Way, 3 Way, 4 Way, 5 Way, and 6 Way.
Crossover components have a single input and multiple outputs.
Double-click a component to display the component editor for it.
Name
Function
1
Crossover Curve
Displays the level of each frequency band,
distinguished by color.
Section
Parameter
Setting Range
Function
2
Input
Level
-
∞ to +10 dB
Sets the input signal level.
3
Output
Level
-
∞ to ±0 dB
Sets the output signal level for each
frequency band.
4
Mute
ON/OFF
Mutes the output signal level for each
frequency band.
5
Phase
ON/OFF
Reverses the phase of the output signal for
each frequency band.
6
Frequency
20 Hz to 20 kHz
Sets the cross frequency between each
frequency band.
1
2
3
6
4
7
5
8 9
)
! @
Crossover component