Yamaha DME - Manual (Page 259)

Chapter 4 Designer
DME Designer Owner’s Manual 259
“Export DXF” dialog box
■ DXF File Name
Enter a filename for the DXF file. The default file name entered here will vary according to the
currently active window.
If you click the [...] button at the right of the box, the “DXF File Name” dialog box is displayed.
Specify the DXF file filename and the folder where the file will be saved.
Enter the filename, specify the folder where the file will be saved, then click the [Save] button.
When you return to the “Export DXF” dialog box, the specified filename will be displayed in the
[DXF File Name] box.
■ Scale
Sets the reduction ratio. When the size of the sheet is large, you can reduce it before exporting it.
■ Text Style
Specifies the text font for output in DXF format. The default is the “TXT” (drawing font used in CAD).
NOTE
When you click on the [Save] button in the “DXF File Name” dialog box, the DXF file is not saved. Only when you click on
the [OK] button in the “Export DXF” dialog box, does the DXF file become saved.