Yamaha DME - Manual (Page 170)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 170
Monitor Out
When you click the [Monitor Out] command on the [Hardware] menu, the “Monitor” dialog box is
displayed. Sets the monitor output destination for monitoring point or probe monitor.
■ [DME]
From the list, select the DME64N/24N where you will be making settings.
■ Drop down list
From the list, select the monitor output port. You can select from the ports that are not connected in
the configuration window.
■ [OK] Button
Accepts the changed settings and closes the dialog box.
■ [Cancel] Button
Closes the dialog box without changing the settings.
NOTE
Monitor Out can be set on DME64N/24N units only.