Yamaha DME - Manual (Page 418)

Chapter 6 Component Guide
DME Designer Owner’s Manual 418
Delay Matrix
This is a matrix mixer that allows you to set an independent delay time and level adjustment for each
output. There are three groups of delay matrix, based on the number of inputs: 2 Input, 4 Input, and 8
Input. In each of the three groups there are five mixers available with 2, 4, 8, 12, or 16 outputs, for a
total of 15 components.
Double-click a component to display the component editor for it. The number of input and output
channels varies depending on the component, but all share a common configuration in the
component editor.
The delay matrix component editor consists of four sections: input, output, matrix, and block. The
[Master] buttons in the [Input] and [Output] sections display windows where you can make master
input and output settings. Delay and level for each channel are set in separate windows that display
four channels each.
Section Name Function
1 Input Master Opens the Input Master window.
2
Output Master Opens the Output Master window.
3 Matrix Delay meters
Send level meters Displays send level and delay time from each input
channels to output buses. Clicking here displays the
Crosspoint window.
2 Input
4 Input
8 Input
1
2
4
5
7
6
3
Delay Matrix component editor