Yamaha DME - Manual (Page 428)

Chapter 6 Component Guide
DME Designer Owner’s Manual 428
■ Input Master
If you click the [Input Master] button in the matrix mixer component editor, it will open the [Matrix
Mixer - InputMaster] editor window. Here you can turn the master input for each channel ON and
OFF and set the level.
■ Output Master Window
If you click the [Output Master] button in the matrix mixer component editor, it will open the Output
Master window. Her you can turn the master output for each channel ON and OFF and set the level.
Section Parameter Setting Range Function
1
Input Phase ON/OFF Reverses the phase of each channel’s signal.
2 Level - ∞ to +10 dB Sets the input level to each input channel.
3 Solo ON/OFF Turns ON solo for each channel. If Solo is engaged
for even one channel, all non-Solo channels will be
muted.
4
On ON/OFF Turns ON each channel’s input.
5 Block On -- Turns ON input for all channels in the Input Master
window. When turned ON, the [On] button lights up.
6 Off -- Turns OFF input for all channels in the Input Master
window.
7
Nominal -- Resets all output signal levels in the Input Master
window, making them 0 dB.
8 Minimum -- Resets all output signal levels in the Input master
window, making them -
∞ dB.
5
6
8
7
1
3
4
2
[Matrix Mixer - InputMaster] editor window
4
5
7
6
1
3
2
[Matrix Mixer - OutputMaster] editor window