Yamaha DME - Manual (Page 39)

Chapter 2 DME Designer Overview
DME Designer Owner’s Manual 39
DME Data Import
This imports DME data file settings into a DME or SP2060 included in the current configuration.
1
Activates the DME or SP2060 configuration layout to be imported.
If multiple configurations are available, the DME or SP2060 configuration layout to be imported can
be selected via the Navigator window.
2
Click the [File] menu in the Main Panel window, and move the mouse cursor over [Import
Device Configuration].
A submenu will be displayed. The DME groups and SP groups included in the current configuration
will be displayed on a submenu.
3
Select the device group to which the DME or SP2060 is to be imported from the submenu.
DME and SP2060 units cannot be used assigned to the same device group.
4
On the submenu, click on the DME or SP2060 into which you will import settings.
The “Open” dialog box will be displayed.
5
Select the DME data file and click the [Open] button.
NOTE
DME and SP2060 units cannot be combined in the same Device Group.