Yamaha DME - Manual (Page 141)

Chapter 3 Main Panel Window
DME Designer Owner’s Manual 141
Parameter List
When you click [Parameter List] in the [Tools] menu, the “Parameter List” dialog box is displayed. A list
of parameters in the current configuration of the current zone are displayed. Here you can check
things like the parameter IDs. You can also print the list of parameters.
When the dialog box is opened or when a DME is selected from the [DME] list, the parameter values
are displayed.
Names and Functions
■ [DME]
From the list, select the DME where you will be making settings. Components in the selected DME
are displayed in the component list.
Component List
The components and user modules included in the DME, their IDs, and the component parameters
are displayed in hierarchal list. The AD and slot are also displayed.
[ID]
Displays the component or parameter ID.
The following is displayed for the parameter ID: “Element No. : X : Y : Parameter No. : Index No.”
[Value]
Displays the value for the parameter.
[Min]/[Max]
Displays the minimum and maximum values for the parameter.
NOTE
Does not apply to SP2060 units.
NOTE
Components for user modules are also listed in a hierarchal display, but if user module security is enabled, the
components are not displayed. However, parameters displayed in the user module editor are displayed here.
NOTE
The displayed parameter values are those that were in effect when the dialog box was opened or when the displayed
DME was selected from the [DME] list. They cannot be changed here.