Yamaha DME User Manual
Page 272
Advertising
Chapter 4 Designer
DME Designer Owner’s Manual
272
Press <Shift> + [F2] to select the uppermost open hot spot to the left of the selected object and
begin drawing a wire.
Press the [F4] key to connect the uppermost open hot spot to the right of the selected object and
the uppermost open hot spot to the left of the object on the right.
Press <Shift> + [F4] to connect the uppermost open hot spot to the left of the selected object and
the uppermost open hot spot to the right of the object on the left.
Advertising