Yamaha DME - Manual (Page 432)

Chapter 6 Component Guide
DME Designer Owner’s Manual 432
■ Crosspoint
If you click a level meter in the matrix mixer component editor, the output crosspoint window for the
group will be displayed. Adjusts the send levels from each input channel to output buses and turns
them ON and OFF. Just like the matrix mixture component editor, the input channels are arranged
vertically while the output channels are arranged horizontally.
Section Parameter Setting Range Function
1 Input Channel -- Switches to another channel group.
2 Output Channel -- Switches to another channel group.
3 Bus Send Level Level - ∞ to +10 dB Sets the send level for each crosspoint.
4 On ON/OFF Turns ON send for each crosspoint.
5
Block On -- Turns ON all sends in the Crosspoint window. When
turned ON, the [On] button lights up.
6
Off -- Turns OFF all sends in the Crosspoint window.
7 Nominal -- Resets all send levels in the Crosspoint window,
making them 0 dB.
8 Minimum -- Resets all send levels in the Crosspoint window,
making them -
∞ dB.
5
6
8
7
1
2
3
4
[Matrix Mixer - Crosspoint] editor window