YSI 5200A User Manual
Page 56
YSI 5200A
110
YSI 5200A
111
Configure PC com port number (1-8) in Firmware Updater program.
5.
Note:
When using USB-Serial Adapter, verify that the port number assigned
-
during driver installation is the same port configured when using Aqua-
Manager Firmware Updater.
Access the YSI web site Downloads page at www.ysi.com to get the latest
6.
version of the 5200A firmware code.
Locate the YSI 5200A firmware and save the file to a temporary directory
7.
on your computer.
Within the lower left box of the Firmware Updater Utility window, browse
8.
to locate the firmware file on local PC and then import it into the utility.
Click OK at the import complete confirmation window.
9.
Select “Program Device”. The following Firmware Updater message ap-
10.
pears.
Configuring the 5200A
Select “Yes” and the following screens will appear.
11.
On instrument:
On PC:
The 5200A will reboot (power cycle) when firmware upload is complete.
12.
Select “ok” when this window appears
13.
Verify version information to confirm downloaded code:
14.
Menus → System → Version
If applicable, disable Force Serial Port configuration -
15.
page97.
Notes:
During upload, 5200A systems are placed into Service Hold which de-
-
energizes any active systems including energized relays. See SVR Hold
Configuring the 5200A