YSI 5200A - Manual (Page 7)

YSI 5200A
12 YSI 5200A
13
Figure 1.1
Preview of User Manual
This manual includes information on installing, configuring, operating, and main-
taining a 5200A system.
Read Chapter 2 “Safety Information” before installing or configuring a 5200A
system.
Chapter 3 “Installation” provides information on how to install the 5200A, 5200A
components, and peripheral devices. Only qualified people should install a 5200A
system. Do not attempt to install or configure this device if you are not qualified
to do so. If information is not clear, DO NOT PROCEED until clarification can be
obtained. All wiring involving connections to main power must be performed by
a qualified licensed electrician and must conform to all locally applicable electrical
codes.
Chapter 4 “Configuring 5200A Systems” provides information on menu structure
and configuring 5200A instruments.
Chapter 5 “AquaManager” provides general information regarding the PC software
program. The AquaManager program includes an extensive help system, which
contains detailed information that is not provided in this manual.
Introduction
This icon is used throughout the manual to indicate helpful information for Aqua-
Manager users.
Chapter 6 “Maintenance” provides information on maintaining the 5200A system
including the monitor, sensor, and component service.
“Notes” at the end of each manual section provide additional information to help
clarify certain 5200A operations and features.
The appendices include information on Unpacking & Inspection, Troubleshooting,
Menu Maps, Declaration of Conformity, Warranty information, and SMS Messag-
ing.
An index is provided starting on page 228.
Product Specifications
To ensure accurate and reliable performance, operate the 5200A system according to
specifications provided in the following tables. Damage and/or incorrect operation
could result if these specifications are not followed.
Product specifications are subject to change without notice. Visit www.ysi.com to
view the most recent product specifications.
Environmental Specifications
Environmental Category Operating Range
Temperature -15 to 70˚C (5 to 158˚F)
Enclosure Rating NEMA 4X (direct exposure to outside conditions),
IP65
Compression Fitting Rating IP 68/NEMA 6 (liquid tight)
Electrical Safety
IEC compliant*
Other RoHS compliant
* See Appendix 4 Declaration of Conformity - page 218.
Introduction