YSI 5200A - Manual (Page 9)

YSI 5200A
16 YSI 5200A
17
Accuracy ± 2% or ± 0.1 ppt
Resolution 0.1 ppt
*Conductivity auto ranges based on the measured value.
Component and System (Non Input) Specifications
Hardware
System
System Feature Specification
Display/LEDs back-lit graphic LCD
(320X240) with timer
readings updated 2 times per
second
diagnostic troubleshooting
LEDs
Outputs
4 on-board relays 240VAC@ 5AMPs switching
capacity; 110VAC@10AMPS;
type: SPDT
Timer Systems 4 timers
10 daily events per timer system
1 feed timer includes sensor & FCR control
Power: There are two 5200A versions available. The DC version can only be pow-
ered by DC power. The AC version can be powered by AC or DC power.
Power for DC
Version:
external 12VDC power
source
9-16.5VDC; 800 mA
Power for AC
Version:
internal AC switching power
supply
100-240VAC; 50-60Hz; 300 mA
Both AC and
DC versions:
lithium battery (for real time
clock)
2032 lithium ion
Electronics
ARM7 embedded micropro-
cessor
DSP (digital signal process-
ing)
Digital processing of 5200A
information ensures accurate
and repeatable readings.
Introduction
Firmware
Feature Specification
Flash Memory Firmware field upgradable with
local PC connection
Data Logging non-volatile data log memory
storage of 3750 records
sensor log (1000 records)
event log (1250 records)
calibration log (500 records)
Configuration
log data (1000
records)
Security password protection
Data filtering reads 2-3 times per second and
readings are averaged
Communication
Feature Specification
RS232 up to 100 ft (30m)
OR
Optional ethernet module remote TCP/IP PC access and/
or email alarming
Instrument to Instrument Networking
Feature Specification
Network 2 to 32 isolated
5200A and/or 5400 instru-
ments
RS485 up to 4000 ft (1220m)
entire network distance
AquaManager
Feature Other PC Requirements
Runs on Windows 2000/XP/
Vista/Windows 7 operating
systems
PC capable of running Windows
2000
VGA display card
CD-ROM Drive
Total RAM Installed: 16MB or
greater
100 MB free hard-disk space
Introduction