YSI 5200A - Manual (Page 86)

YSI 5200A
170 YSI 5200A
171
AquaManager
print graph and printer setup -
close node window -
copy graph to clipboard -
insert manual event -
graph management -
customize graph settings -
clear graph overlays -
view data, calibration, event, & configuration event logs -
restore Node Window size to include access to systems management and poll -
node buttons
Systems Management access - viewing and uploading a configuration to a -
5200A
Graph Display options -
Manually poll node button -
Current data is displayed at the top of the graph during a manual poll -
Systems Management
To open Systems Management, click on the Systems Management button located
to the right of the graph in the Node Window. Use the tabs to view and upload a
configuration to the node. The node configuration displayed is based on last poll.
07/30/2008
The following configuration and tasks are performed from Systems Management
forms:
view and configure node sensor and aux systems -
view and configure node timer and feed timer systems -
view and configure most node systems (5200A system menu) -
configure node mapping icons -
Notes:
Always manually poll the 5200A after uploading configuration changes -
and verify that the uploaded information is retained. When configura-
tion changes are uploaded using AquaManager at the same time con-
figuration changes are being made by a user in the menus at the 5200A,
AquaManager uploads may not be saved depending on the timing of
keystrokes at the 5200A.
The Run Screen must be displayed during normal operation. - If the
5200A is not at the run screen during AquaManager uploading, pressing
at the 5200A will only save certain configuration changes.
Database Management
For optimal operation and safeguarding, compact and back up the AquaManager
database. Uncompacted Access database(s) may become > 1GB when polling large
networks and/or large data logs. Compact the database from the Explorer Win-
dow Tools>Database Maintenance>Compact Database or from the System Wide
Properties>Gen. settings tab.
Configure an automatic weekly backup from the System Wide Properties>Database
Backup tab.
AquaManager