Installing aquamanager, Pc requirements and features software installation, Pc requirements and features – YSI 5200A User Manual
Page 84: Software installation
YSI 5200A
166
YSI 5200A
167
Installing AquaManager
AquaManager provides data logging, graphing, autopolling, mapping, system con-
figuration control, and displays near real-time sensor and aux input values* at the
desktop PC. AquaManager is a valuable tool for remote and local access applications.
An extensive online Help system is provided with AquaManager.
*Near real-time - The AquaManager map is updated several times a minute as
AquaManager constantly communicates with the nodes during Autopolling using
SMS commands. This results in displaying near real-time sensor and aux input
values on the map.
One copy of AquaManager per machine is required.
PC Requirements and Features
System requirements:
PC capable of running Windows 2000
-
Microsoft Windows 2000/XP/Vista/7 compatible
-
VGA display card
-
CD-ROM Drive
-
Total RAM installed 16 Megs or greater
-
100 MB of free hard-disk space
-
Internet Explorer 7.0, or higher
-
Adobe Flash 10B or higher
-
Administrator privileges on the PC where the application is being installed
-
In addition, Vista users must enable UAC properties prior to AquaManager
-
registration. Go to Aquamanger.exe file properties in the program file folder
and check the box ‘Run with Administrator Privileges’.
AquaManager
Additional System Recommendations:
Total RAM installed 64 Megs or greater
-
300 MB of free hard-disk space
-
latest versions of Microsoft including O/S and Internet Explorer.
-
Software Installation
Run AquaManager.exe on the CDROM and follow the instructions in the
1.
installation setup.
Refer to the README.txt file on the CDROM for additional information
2.
on installation and use of the AquaManager application.
Getting started
Open application and register. The registration code number is located on the back
of CD case.
See AquaManager Online Help for detailed application configuration information.
Before the node can be accessed using AquaManager, perform the following:
Create, or Open network;
1.
Insert group;
2.
Insert node(s);
3.
A. Determine communication method;
B. Obtain 5200A and/or 5400 serial number(s);
Poll node to obtain current node configuration;
4.
Complete configuration of node and AquaManager features for your ap-
5.
plication.
AquaManager