IAI America ACON-CG - Manual (Page 188)

174
* Appendix
Appendix
Positioning Sequence
Given below is an example of basic sequence for creating a positioning sequence
indicates PIO signals of the controller.
Timer1
PEND
PM1 PM2 PM4 PM8 Timer1
PEND SV
HOME
A
B
C
D
E
F
H
I
J
K
L
PM1 PM2 PM4 PM8
Timer1
PM1 PM2 PM4 PM8 Timer1
PM1 PM2 PM4 PM8 Timer1
PM1 PM2 PM4 PM8 Timer1
HOME
HOME PEND
PEND
HEND
H
H E K
J L
K
K A (O)
L
(Must be longer
than the PLC’s
scan time.)
Completed position codes
Waiting for the completed
position to be read
Completed position 1
Completed position 2
Completed position 3
Completed position 4
Completed position 5
Create for the number of positions.
Home return
request (push
button)
(Home eturn operation)
Home return command
Home return
complete pulse
Positioning
start request
to position 1
Positioning
start request
to position 1
Positioning start
pulse to position 1
Auxiliary positioning
start pulse to position 1
The positioning start request signal is converted to pulse in such a
way that one start signal is issued for one positioning operation.
Auxiliary positioning
start for position 1
Start check for
position 1
Auxiliary start
signal for next
positioning
Check if positioning to the specified position has completed.
Completion of
positioning to position 1
Current positioning
completed position
(Completed-position decoding circuit)
Position complete
Ready
(Positioning circuit for position 1)
Home return completion
F
I
I
J