IAI America PCON-CFA - Manual (Page 122)

4. PCON-CA/CF
A
CC-Link
116
(* “ON” in the table shows the corresponding bit of “1” and “OFF” shows “0”.)
Address Bit Symbol Functions Details
b2 DIR
Pressing Direction Setup:
“OFF” for the direction reducing the positioning width from
the target position, “ON” for the direction adding the
positioning width from the target position
4.7.7 (22)
b1 PUSH
Pressing Setup:
“OFF” for Positioning Operation, “ON” for Pressing
Operation 4.7.7 (21)
Control
signal 1
b0  Unavailable 
b15 BKRL Brake Forcible Release: “ON” for brake release 4.7.7 (18)
b14 RMOD
Operation mode:
“OFF” for Auto mode, “ON” for MANU mode
4.7.7 (19)
b13
b12
b11
b10
b9

Unavailable

b8 JOG+
+ Jog: “ON” for Movement in the Opposite Direction of
Home
4.7.7 (13)
b7 JOG- - Jog: “ON” for Movement to the Home Direction 4.7.7 (13)
b6 JVEL
Jog Speed/Inching Distance Change-Over:
“OFF” for using the values set using the Parameter No. 26
“Jog Speed” and Parameter No. 48 “Inching Distance”
“ON” for using the values set using the Parameter No. 47
“Jog Speed 2” and Parameter No. 49 “Inching Distance 2”
4.7.7 (14)
b5 JISL
Jog/Inching Change-Over:
“OFF” for Jog Operation, “ON” for Inching Operation
4.7.7 (15)
b4 SON Servo ON Command: “ON” for Servo ON 4.7.7 (5)
b3 RES Reset: “ON” for Reset Execution 4.7.7 (4)
b2 STP Pause: “ON” for Pause Command 4.7.7 (11)
b1 HOME Homing: “ON” for Homing Command 4.7.7 (6)
P
LC
O
ut
pu
t
Control
signal 2
b0 DSTR Positioning Start: “ON” for Movement Command 4.7.7 (8)