0 printer test, Printer test – ZOLL X Series Monitor Defibrillator Rev D User Manual
Page 34
Advertising
C
HAPTER
1
M
AINTENANCE
T
ESTS
28
9650-001356-01 Rev. D
12.0 Printer Test
Equipment
None
Do this...
Observe this...
Pass/Fail
12.1 On the X Series unit, verify that paper is
installed.
12.2
Press the
Print quick access key (
)
to start
the recorder.
Note: If the printer fails to start, check setup
for printer=yes.
12.3
Press the Print quick access key
(
)
to stop
the recorder after approximately 10 seconds.
The printout on the strip chart
is clear and dark.
o
o
Advertising