ZOLL X Series Monitor Defibrillator Rev D - Manual (Page 63)

X Series Error Messages
9650-001356-01 Rev. D X Series Service Manual 57
PACER CURRENT FAULT Lack of pacer current. Replace the defibrillator
board module.
PACER DEVICE FAILURE Generation of pacer pulse
failed. Replace the defibrillator
board module.
PRINTER OFFLINE Printer module is off-line. If it remains off line, try
checking the connectors or
power to the printer. If
problem persists, replace
the printer module.
PRINTER OUT OF PAPER If there is paper in the
device, probably a paper
sensor problem. Replace the printer module.
PRINTER PLATEN OPEN If printer door is closed,
probably a problem with the
micro switch. Replace the printer module.
PS DEFIB CHARGE
SHORT One of the paddle set keys
are stuck. Replace the paddle set or
MFC.
PS DEFIB ENERGY DOWN Paddle set keys are stuck. Replace the paddle set or
MFC.
PS DEFIB ENERGY DOWN
SHORT Paddle set energy down
select button is stuck. Replace the paddles.
PS DEFIB ENERGY UP Paddle set keys are stuck. Replace the paddle set or
MFC.
PS DEFIB FIRE SHORT Paddle set keys are stuck. Replace the paddle set or
MFC.
PS DEFIB RECORDER
SHORT One of the paddle set keys
are stuck. Replace the paddle set or
MFC.
QUICK ACCESS SW 1(to
SW 7) SHORT One of the quick access
keys (key 1 to key 7) is
stuck. Replace the front panel.
SCREEN CYCLE SHORT Display/home key is stuck. Replace the front panel.
Error Message Explanation Technical Action