ZOLL X Series Monitor Defibrillator Rev D User Manual
Page 84
Advertising
C
HAPTER
3
D
ISASSEMBLY
P
ROCEDURES
78
9650-001356-01 Rev. D
5
Remove EtCO2 module by
lifting assembly out. If
necessary disconnect NIBP
hoses to make it easier to pull
connector through.
6
Cut the tie wrap holding the
ferrite bead.
7
Remove three (3) screws
from NIBP unit.
Note: During reassembly,
torque screws to 6 in-lbs.
Advertising