ZOLL X Series Monitor Defibrillator Rev D - Manual (Page 74)

C HAPTER 3 D ISASSEMBLY P ROCEDURES
68 9650-001356-01 Rev. D
6 Disconnect the battery
communication cable (yellow,
orange, brown, red)
connector from the monitor
board.
7 Disconnect the monitor/
defibrillator flex cable and
MFC cable connectors from
the monitor board.
Note: Be careful to pull the
connector straight out.
Rocking the connector or
disconnecting it at an angle
may result in bent pins.
8 Disconnect the three power
cable connectors (battery
(black), AUX (white), and
defibrillator (red)).