ZOLL X Series Monitor Defibrillator Rev D User Manual
Page 79
Advertising
Removing the Display Module
9650-001356-01 Rev. D
X Series Service Manual
73
2
Using the 6mm socket
wrench, remove the hex
standoff located underneath
the screw you just removed.
Note: During reassembly,
torque to
6 in-lbs.
3
Place the back of the unit
down on the mat so that the
display screen is facing up.
4
Remove the six (6) screws
from the front of the casting in
the areas illustrated.
Note: During reassembly,
torque screws to 6 in-lbs.
Advertising