Yokogawa Value Series FX1000 - Manual (Page 126)

Switching Operation Screens
4-17
IM 04L21B01-01EN
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
4.5 Displaying Various Information
This section explains how to display reports (/M1, /PM1, and /PWR1 options) and how to
use the status displays.
For a description of the function, see section 1.3.
Procedure
• Showing the Display
1. Press DISP/ENTER to show the display selection menu.
2. Press the up and down arrow keys to select INFORMATION.
3. Press the right arrow key to display the sub menu.
4. Press the up and down arrow keys to select the sub menu item.
To close the menu without changing the displayed contents, press the ESC key.
Information display sub menu
MODBUS CLIENT: Displays the Modbus
client status
MODBUS MASTER: Displays the Modbus master
status
RELAY: Displays the relay status
REPORT DATA: Displays report data
ALARM SUMMARY: Displays an alarm summary
See section 4.6.
(Not displayed with the default settings. To display, see section 5.16.)
MESSAGE SUMMARY: Displays a message summary
See section 4.7.
MEMORY SUMMARY: Displays a memory summary
See section 4.8.
COLUMN BAR: Displays report data using
stacked bar graphs
5. Press DISP/ENTER.
The display appears.
• Displaying the Report
• Switching the Displayed Report Data
The Index item on the report display shows “the number of the report data being
displayed/the number of report data saved in the internal memory.” The largest
report data number corresponds to the most recent report data. Start is when the
report is started and Timeup is when the report is created.
Number of the report data being displayed
Number of report data saved to the internal memory